Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
I have a Win10 host that crashed this weekend. I reinstalled windows and Factorytalk Activation. Now my VM won't pull the licenses.
Host and VM...
Have a bad output on a Micrologix 1200. Moved wire over to an available output, changed program to associate with new output. downloaded program...
The analog array has 16 individual bits and each bit is an alarm.
SCADA is having issues getting the BIT bool value.
However they can get the...
I have a project based on the Micro820. My project does not have an HMI, and the application is locked. In order for our customer to reconfigure...
This old chestnut again...
Our clocks (UK) went back an hour yesterday.
Now the time displayed on the HMI is 1hr behind what it should be.
In...
Hi everyone,
I am working as a technician at a automotive factory. Recently, we had same quality problem several times on a workpiece. I had a...
I don't have much experience in programming. I can do simple configuration.
it is like this. i want to add something to the existing ladder...
I'm trying to set up communications between a OI.MBTCP I/O server (for our historian) and a COMX510 that is on the same network , the COMX is also...
Good morning, I'm new to PLC and HMIs, and I was given the following problem: I need to be able to filter alarms and events that are only related...
My department has been tasked with writing the program for a 4 pump lift station that alternates all four pumps (one lead, one lag, two on...
Have a customer that has a running 1756-l83es, communicating to redundant ABCIP IO servers for Wonderware 2020. This configuration has been...
Existing environment shown in attached photo (Existing.jpeg)
Proposed Environment shown in attached photo (New.jpeg)
I am migrating a PLC5 system...
Hello.We are trying to convert a program written with S7-300 Simatic Manager to S7-1200 V16.Unfortunately, there is only LAD,FBD option in S7-1200...
Hello all,
I am facing an issue with my Commander SK that I cannot solve on my own, I am struggling on it since several days :confused:
The...
Hello. An absolute encoder on a rotary axis gives values in range -2147483648 to 2147483648. When value is > 2147483648 , the encoder value is...
Hi there guys. Hoping you can shed some light on this for me.
I have Beijers E1012 HMI (basically a 2 line text job with 422/232 comms
Im...
Currently I'm working in a project, and there is a problem, we need to show what is going on with the CR30 through an app developed in VB.NET, we...
Hi all,
i'm looking for a calibrator that will produce a 0-20ma signal as well as 0-10V.
it also needs to read these signals.
i have searched...
Based in the US, machines sold in the US. What are your thoughts, or does anyone know of any standards regarding multi-step machine reset and...
Hi,
I am very much a novice when it comes to PLC's I have only ever had to change the IP address on them, and go off notes left by a previous...
CPU: 5069-L330ER v32
HMI: PV+7 10" v11
Every time the customer powers off the machine and re-applies power, the HMI gets stuck on Starting...
i have a dell laptop with a real com port host OS is windows 10. Running VB 6.1.42 I cannot get the serial port to configure in VB.
Please Help...
Hi all,
IÂ’m having issue on 1756-OB32 where one of the channel (CH14) keep on has 24vdc, causing my solenoid keep on energising without command...
Hey all,
I'm trying to make a 3d isometric view of a box scale with some variables. Applying height/width animations to the group of polygon...
Hi can you help, have a book stitching machine with collates pages in 8 stages.
I have installed a camera system that will give an input to...