Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
Hi,
Again, a topic about Kinetix 5100 servo drives. The controller is L33ER. The servo drive are 2198-E1020-ERS with a TLP-115-200-DJMC2A.
There...
I'm running into an issue migrating a PLC-5 using the newer Logix Designer Export when opening a saved .ACD from RSLogix-5.
It has multiple RIO...
Hi,
I would like to prepare a project for the operator panel and I do it like this:
New project -> I choose the appropriate panel, it seems to me...
Can someone help me with this?
I'm no good at SCL - virtually everything I've done so far has been ladder logic.
The return value from the...
Hello every body. I want to get back up from BACHMAN MX213 PLC.how can I do it?
Our system utilises INPUT_BYTE to capture NMEA0183 ASCII stream which sends data to the NOM multiple times a second. The NOM module can either be...
Hi,
I'm assisting a friend with a AT1-04K0X VFD. That's sold under several names like Vikye. Unfortunately VFD's are a weak subject of mine. It's...
Hello,
My company has recently been tasked with a redesign of an HMI and they were originally using Numeric Inputs to display the values. I am...
We have an existing VSD where a three phase circuit breaker feeds the drive, and two phases also tee off to a contactor, which is energised to...
Hello everyone,
in FT SE (network distributed) user manual, to copy the path from primary to secondary server, there should be an option under...
Hello,
I tried to install the PanelView Plus 6 700-1500 to firmware 12. On the ControlFlash Plus software, It asked to install the non-DMK. I...
Hello,
I am doing research project focused on the retrofit of a diesel locomotive into a hydrogen-fuel-cell-battery hybrid locomotive. The...
I have been using RSLogix 500 version 9 for a long time now. I am about to need to move to something else Rockwell related to cover the...
OK, so I am running into an interesting issue.
I just setup SoftLogix v23 on a system for testing, along with Studio 5000 v23.
SoftLogix...
Hey all,
I'm doing a more standardize version of one of my programs and organizing things into UDTs and whatever else I can do to shrink the...
Hi all, I don't have experience PLC programming so it might be a stupid question.
I made a socket request to PLC and there is no problem to read...
At the moment on my application (S7-1212C), the PLC/HMI are showing the correct time, i.e. the displayed time matches the time of the clock on the...
Howdy Everyone,
We have an old ternary drive from Wittenstein it is a TXBA046AAQ, i got the EDS file so i can add it to RSNETWORX for devicenet...
I'm trying to get comms to a SLC CPU 504 using a moxa gateway EIP 3270. I can use their Procom software which sets up a virtual comm port so...
Good afternoon guys, does anyone recommend a direct replacement part for Allen Bradley's 1761-NET-ENI devices? We have a lot of these in our plant...
Hello all...
I'm looking for a 480v 3ø 25+ amp Solid State Relay to replace a mechanical one beating itself to death keeping temp in a heating...
Hi.
I am making a control system for a machine which shall be sold world-wide incl. USA.
For USA I am aware that UL508 entails several...
Hi all,
I am working with an IO link sensor (measuring current across motor)and need to read in and store the sensor values for 5 seconds, then...
Hello everyone, I have been looking for APM Motion Programmer 1.51 software, if someone could provide it to me I would greatly appreciate it, I...
I am using a Beckhoff PLC and trying to convert a REAL to 2 WORDS to send over Modbus.
Does anyone know how to do this?
Also how would I convert...