Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
Hello all.
I have a remote that uses a 1734-AENTR series C.
We had to change it to a new one and, after adjusting the IP and number of slots...
Hey Everyone,
I'm using studio 5000 version 33.12
The plc firmware is 33.012
I have this plc model: Compactlogix 5370 1769-L16ER-BB1B and when I...
After updating a panel, I inherited another PLC for my "learning lab". It's a Modicon TSX Micro. I've not worked with a Modicon PLC yet, so I...
I have recently installed one of these counter modules into an exisiting working Flex I/O system. The goal is to read pulse inputs from an...
I need to recommend a PC to replace a customer's old Windows 7 computer. The only thing I need to think through is the serial com port to...
I have an issue.
I am trying to resolve what logic is in a 90-30 PLC (364 CPU).
I have 3 Machine Edition backups with different names. All show...
Hello!
I need the software ECT (for programming Atlas Copco DMC 50720 servo drives).
Atlas Copco or Inmotion doesn't support this series anymore...
Hi
I´ve been looking around the web trying to find programming software for Atlas Copco DMC drive series..(Example: DMC 50720)
This far I...
We have a quad monitor setup with FT SE and we are utilizing a header screen at the top of every display. when we open a new page we abort the...
Hi all,
This is my first time working with a 1734-IE2C analog module. I am tasked with wiring the flow meter into the analog card and the OEM is...
Hi All,
I've been playing with 2 stratix switches in my test bench and seeing how different configurations affect the behaviour when 2 managed...
Good morning,
I have had a machine stopped for some time, my servo works in manual mode, but it does not work in automatic mode. My equipment...
Bom dia,
Estou com uma máquina parada algum tempo, meu servo funciona em modo manual, porém não funciona em automático. Meu equipamento e...
Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...
dear all..
i am designing the Sea Water Intake pump which the 4 pumps will be operated parallel, and 1 pump will be as stand by pump
The pump data...
hello, I am using Beckhoff with TwinCAT3 and when I change or add some new hardware or for any reason, there is a mismatch in the real hardware vs...
Hi All, Can anyone advise me on how to determine the AN of a genie instance I writing to. I have created a genie to display a valve and some text...
It was hard trying to find the software ECT for this drive. Finally, I found it but since it is very old it is not intuitive at all. Is there a...
Hi everyone,
I am working on a project that needs to expose the SV (Set Value) of a temperature controller to a SCADA system.
SCADA <-...
@ All: what is your best guess on a potential range in increase in efficiency in % (i.e. saved programming hours, greater output, etc.) when...
Good morning,
Recently, I've heard the Micrologix 1500 PLC has become obsolete and Allen Bradley does not repair them either.
Is there a list...
Hi
I have been knocking my head against the wall trying to figure out why these two plcs won't talk with Produced and Consumed Tags data.
The...
I'm looking for some clarification if anyone here is familiar with UL698a panels.
Panel is out of zone/class'd area. with thermocouples extending...
Hello,
I have a small DLR ring set up in a lab that consists of 1 Stratix 5200 and 2 ENTR/Cs. I am having an issues only on recovery of the ring...