OMRON Ethernet

Atoris

Member
A
Join Date
Dec 2015
Location
Presov
Posts
3
Hello
I am greenie in programing PLC and i need help.
I need to set Ethernet communication between:
CP1L - EL30DT1
CP1H with CP1W-CIF41
And send information from CP1H to CP1L.
I want to use command RECV if it possible...
I upload software for CP1L-EL30DT1

Can someone help me?
Thanks
 
Last edited:

Similar Topics

A
Kepware and Omron NJ Ethernet
I have a strange Kepware issue I have been dealing with for a few weeks. I have Kepware setup with the Omron NJ Ethernet driver and reading in...
Replies
0
Views
97
acborne
A
P
Citect SCADA (Aveva Plant SCADA) IO Device Setup with Omron NX/NS over Ethernet/IP
We are trying to set up a newer generation Omron PLC (NX/NS Series) with Citect / Aveva Plant SCADA using the Ethernet/IP CIP Protocol to read...
Replies
2
Views
352
plcplcplcplc
P
D
Avery Weightronix ZM series to Omron CJ with Ethernet IP
Has anyone had success communicating between the Avery ZM series of weight indicators and Omron CJ PLCs? I can easily do setups when provided...
Replies
0
Views
317
djpjd
D
J
Read Data from Omron CP2E from Mitsubishi RJ71EN71 Ethernet Module with R04CPU
Hi Guys, I am trying to read data from Omron CP2E CPU from my Mitsubishi RJ71EN71 with Simple CPU Communication Function. Suppose it was using...
Replies
2
Views
1,807
Dave W.
D
Z
Omron C200HX - How Is It Communicating Via Ethernet?
I can't figure out how CX-Programmer is connecting to this PLC. - C200HX PLC - in the field. - Laptop connected to a network via ethernet cable -...
Replies
3
Views
2,474
IO_Rack
IO_Rack
Back
Top Bottom