Hi everybody my name is Juan and i'm new in this group i`have a question and i glad if you can helpme please. I have a omron cpm2c controler and the software for it a friend give to me but i don`t have the communications cable betwen my pc to the plc i ask in my locality but nobody have the cable and i really need it can some of yours send me the connection pins in the controller or the configuration to make a "homemade" cable i really apreciate you helpthanks Juan.
help on my CPM2C
- Thread starter juanlec
- Start date
GO TO www.ebay.com AND TYPE A SEARCH FOR THE CABLE FOR THE PLC TYPE OR JUST TYPE THE MANUFACTURER'S NAME IN AND I BET YOU CAN GET ONE PRETTY CHEAP
machelec
Member
I think you can do it yourself .
look here :http://www.gkong.com/learn/learn_detail.asp?learn_id=88
look here :http://www.gkong.com/learn/learn_detail.asp?learn_id=88
Similar Topics
I need help to program a CPM2C-20CDTC-D to drive a step motor and a air cylinder.
The process is simple, but I have not done any ladder...
hello people can somebody help me to make a communication cable for my pc to my cpm2c plc? any one have a cable for this plc? can send me the...
HI everyone,
i am new to Siemens plc programming and i am in need of some help.
yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Hello, I need to write the following program in Ladder language, but I could not integrate the Fibonacci sequence into the ladder. Can you help...
