fanuc text message

abcgijs

Member
A
Join Date
Jan 2016
Location
amersfoort
Posts
1
hey,

Im currently working with a Fanuc robot and i want it to send a text message to a phone when ever it has an error, can someone help me with this im new to programming.

Thanks in advance,
 
I dont know whether the robot could send SMS messages directly.
But if the robot is connected to a PLC then you can use E>W>O>N FLEXY module to send/receive SMS messages.
 

Similar Topics

J
Fanuc CNC Communication Failure
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
Replies
1
Views
105
bill4807
B
C
Ge fanuc Logicmaster 1F
I want to buy this program if anyone has it. Absolutely no one has it officially for sale. My cpu is IC610CPU104B My mail...
Replies
2
Views
108
Cnc service
C
G
Logix500 to Fanuc R30iB Ethernet
I've got a Micrologix 1100 with ethernet and I'm trying to configure communications to a Fanuc R30iB controller. I'm pretty sure you have to set...
Replies
0
Views
99
gforkner70
G
A
fanuc 90-30 cpu 352 time clock
We recently purchased a IC693CPU352 module and it appears the internal time clock is static. I can set the time and date but once set it does not...
Replies
5
Views
168
Steve Bailey
Steve Bailey
K
Fault link blinking in GE Fanuc IC200PNS002-AC Versamax Network Interface Module
I have one GE Fanuc IC200PNS002-AC Versamax Network Interface Module and the fault red light is blinking and i have checked in manual it is...
Replies
9
Views
209
Steve Bailey
Steve Bailey
Back
Top Bottom