Connecting control logix and HMI 700 to PC

macstorm

Member
Join Date
Jan 2014
Location
india
Posts
17
Hi all,
I have connected my PC, PLC AB 1756 control logix and HMI panelview 700 to SG92-24-AS cisco switch.
I am able to ping all the devices from the PC. But when I try to download the program from studio 5000 it says that the communication...
In the RSLinx i could view the HMI and PLC connected.
What may the problem.
 

Similar Topics

Hi, just starting to learn citect Scada, and im trying to connect it to the control logix, i have followed all the instructions in the "help"...
Replies
0
Views
3,895
I am wondering what would be the best way to connect our 2 Process control networks to a new control logix controller (L5561 ) Can you install two...
Replies
2
Views
3,768
We've got a portable cooling pump which circulates a coolant oil. The spec says it can be remotely operated (coolant START/STOP), via a 3-pin...
Replies
3
Views
1,474
I've been resurrecting an older machine from 2005 and have had good success with help from the forum. Got connected to the PLC and was able to...
Replies
4
Views
1,363
I am using FactoryTalk VIEW alarm server to set level alarms on tags in the PLC. I am pointing the Enable and Disable bits for the alarms to bits...
Replies
1
Views
4,148
Back
Top Bottom