Define initial graphic (display) on factory talk 5.10

Good evening

I know these might seem trivial, but how do you define an initial display on FT 5.10? I made a display named ¨[MAIN]¨ just like in factorytalk 7.0, but in this one the main is not defined by default.

Thank you.

In the project tree on the left, under system, there is a start-up option.

Open this and you will see initial graphic option. Put whatever graphic you need in here.

Cheers

Mark

MarkNightingale said:

In the project tree on the left, under system, there is a start-up option.

Open this and you will see initial graphic option. Put whatever graphic you need in here.

Cheers

Mark

Click to expand...

Thanks Mark