Hello everybody!
I have CO2 sensor and VFD to wentilator. How to program speed process use the block PIDE in RSLOGIX 5000? PV - I use sensor value, CV - VDF speed
(MIN 0.3 = 15 HZ, MAX 1.3 = 50 HZ)
What set in this PIDE block
And how to configure this
THX!
I have CO2 sensor and VFD to wentilator. How to program speed process use the block PIDE in RSLOGIX 5000? PV - I use sensor value, CV - VDF speed
(MIN 0.3 = 15 HZ, MAX 1.3 = 50 HZ)
What set in this PIDE block
And how to configure this
THX!
?