omron error.

chandan suthar

Member
C
Join Date
Jun 2013
Location
Jaipur Rajasthan
Posts
18
Dear Friends,


I have a omron PLC CP1E-E40DR-A. PLC was ok and working properly but now ERR/ALM light glow and I can not communicate PLC to my computer.


How can I solve this problem.
Please give me solution...:confused:
 
Check section 6-1-5 of the W379 (CP1E CPU Unit Hardware) manual. The error you describe is a Fatal CPU Error. You will probably have to contact Omron to resolve it.
 

Similar Topics

M
OMRON Network Configrator ERROR
Hi, I am facing an error inside Omron Network Configurator. I have 2 PLC communicate each other using ethernet cable, send signal using Network...
Replies
2
Views
117
chelton
C
B
Omron R88D Initialization Error
Hi Everyone I am facing an issue regarding Omron servo drive R88D KN06F ECT. When I try to replace the servo drive on the machine it is stuck on...
Replies
0
Views
300
Bilal Tanoli
B
E
Fix omron cj1m INH lit error
i have been trying to connect to omron cj1m via peripheral port(USB to Serial), but there isn't any sign to show that it has connected, so am...
Replies
0
Views
318
emmanuelit
E
J
Omron CJ2M Error after setting IP address
Hi, I am very much a novice when it comes to PLC's I have only ever had to change the IP address on them, and go off notes left by a previous...
Replies
3
Views
926
BobB
BobB
W
omron cj1m-cpu12 error code 31
Has anyone encountered an error code 31 on an omron cj1m-cpu12? This error code is not covered in PLC manual.
Replies
1
Views
521
lostcontrol
L
Back
Top Bottom