PLC Pie Guy
Member
Good morning all.
I am wanting to post a .ACD file to see if anybody can help me with it. I have a output that when turned on flickers badly. It is coming from the the PLC as i can see the output light on the card flicker. I am having trouble nailing down the cause. I am suspecting that it may have something with my I/O buffering but not sure. I tried to write my code in a way that would prevent the flicker from happening but no dice. I will attach a screen shot of the trend I took of one of the two affected outputs. Keep in mind these outputs come on and off together and are flickering together as well. Any advice would be appreciated.
If anybody will look at my project I will have to PM it or email it as this small little program is exceeding forum limits to post.
I am using RSL5000, V20, L35E processor.
Outputs are called R1S6.5 and R1S6.6
Thanks for any help provided.
I am wanting to post a .ACD file to see if anybody can help me with it. I have a output that when turned on flickers badly. It is coming from the the PLC as i can see the output light on the card flicker. I am having trouble nailing down the cause. I am suspecting that it may have something with my I/O buffering but not sure. I tried to write my code in a way that would prevent the flicker from happening but no dice. I will attach a screen shot of the trend I took of one of the two affected outputs. Keep in mind these outputs come on and off together and are flickering together as well. Any advice would be appreciated.
If anybody will look at my project I will have to PM it or email it as this small little program is exceeding forum limits to post.
I am using RSL5000, V20, L35E processor.
Outputs are called R1S6.5 and R1S6.6
Thanks for any help provided.