M-Bus HD67077

m.peric87

Member
M
Join Date
Feb 2013
Location
Serbia
Posts
39
I want to connect controler MicroLogix 1100 with calorimeter Sonometer 1100 via HD67077 M-Bus-Ethernet converter.

For HD67077 I using softver Compositor SW67077.

I have in field calorimeter Sonometer 1100 with M-Bus communication and I want to use data from him to show on PanelView.
But I'm not really shure how to make that work.
So I supposse I need to use Explicit Messages.


Can anyone give me some advice or example how it should be done?
 

Similar Topics

K
RSLogix 5000 and HD67077-B2 M-Bus to Ethernet converter
I am using the HD67077-B2 M-Bus to ethernet/IP converter and I am trying to connect it to a PLC to be able to read data from Siemens Heating and...
Replies
0
Views
1,248
keristos
K
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
2
Views
23
Steve Bailey
Steve Bailey
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
51
Voltimus
Voltimus
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2
Replies
26
Views
309
OkiePC
OkiePC
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
117
Corsair
C
Back
Top Bottom