Inventia RTU MT-101

NR16

Member
N
Join Date
Sep 2013
Location
Port Louis
Posts
14
Hi Everyone

We are in phase of implementing a small telemetry system for lifting stations with Inventia RTU MT-101 and I'm new to this RTU.

Has someone already experience with this RTU and could please share a running program to familiarise with this RTU.

Thanks in advance.
 

Similar Topics

A
Error 36 in microwin modbus rtu
Dear All, i am trying to connect Danfoss inverter with s7 200 cpu 226.but microwin shows following error at DATA Ptr.i assigned different VB...
Replies
1
Views
46
BryanG
B
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
221
Jkoso
J
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
252
KalvMavin
K
P
Mircologix 1400 ModBus RTU Link Layer Error
Hi, I'm having an issue with a mircologix not transmitting out. The current setup is a mircologix 1400 connected to a Guardian 100 Radio...
Replies
1
Views
109
drbitboy
drbitboy
T
Modbus RTU over TCP vs. Modbus TCP
If a device has Modbus RTU over serial and Modbus RTO over TCP and Modbus TCP then there is a difference between Modbus RTU over TCP vs Modbus TCP...
Replies
7
Views
477
Tim Ganz
T
Back
Top Bottom