inhibit lecom a/b
- Thread starter Oubax
- Start date
widelto
Member
Go to:
http://download.lenze.com/TD/EMF2102IB__LECOM-A-B-Li AIF module__v2-0__EN.pdf
Never have used this drive, but I was curious what Lecom A/B means.
Go to item 6.3.1.
http://download.lenze.com/TD/EMF2102IB__LECOM-A-B-Li AIF module__v2-0__EN.pdf
Never have used this drive, but I was curious what Lecom A/B means.
Go to item 6.3.1.
Similar Topics
Is there a way to change inhibit state of an IO card at the bit level?
I know it can be done with modules via GSV/SSV
But can it be done on...
Question-
Say I have 8 digital INPUTS to my PLC, any of which may be asserted HIGH for a few seconds, all these inputs "OR'd", currently, to...
My customer has a PLC-5/80 with 20+ RIO racks. They've asked me to remove one of the racks without shutting the system down. Can I set the...
So everyone knows how to inhibit a module in studio or rs5000
I need to do the equivalent in tia portal 15.
Need to run some test code but my...
Good afternoon to all,
I have a 1756-EN2TR PLC using studio 5000, along with a Kinetix 6500 (2094-EN02D-M01-S0) drive. This drive controls my...