Scaling Analog Input RSLogix 5000

m.peric87

Member
M
Join Date
Feb 2013
Location
Serbia
Posts
39
I need to scale analog input.
I'm using software RSLogix 5000 and analog card 1769-IF4XOF2.
So I want to make scaling for current sensor 4-20mA<=>0-200 Celsius
In RSLogix I used SCP(Scale w/Parameters) functions. But how I should do that in RSLogix 5000?
 
Last edited:
You could write your own AOI as Jeremy stated. But rockwell has a AOI already made that you can download from there site. They also call it a SCP it is like the ones used in RS LOGIX 500.
 

Similar Topics

H
Load cells and Analog input scaling in tia portal
Dear all Iam using three load cells connected in parallel to calibrate the weight of a product but in don't have a weighting module in my...
Replies
4
Views
3,476
Hossamhegab
H
M
PLC 5 analog input scaling question
Hello everyone, I have a plc 5 input card receiving an input from a conductivity Transmitter where 0ma=0 uhms and 20ma= 20,000 uhms The raw min...
Replies
8
Views
3,625
OkiePC
OkiePC
M
PLC 5 analog input scaling question
Hello everyone, I have a plc 5 input card receiving an input from a conductivity Transmitter where 0ma=0 uhms and 20ma= 20,000 uhms The raw min...
Replies
2
Views
1,830
M15cell
M
H
Schneider M221 & SoMachine Basic - ANALOG INPUT SCALING
Hello! I am new at PLC programming. I am using TM221CE16R PLC with TM3AI8 analog input module and SoMachine Basic v1.6. I am trying to scale...
Replies
8
Views
7,068
parky
P
G
Scaling Analog Input to float and getting negative number
Hello, I have a Micrologix 1400 PLC and using RSLogix 500. Using a Multi Ranger Ultra Sonic Level Sensor and the input is moved to N7:11, then...
2
Replies
15
Views
3,882
Firejo
Firejo
Back
Top Bottom