slightly off topic

Soggy Canuck

Lifetime Supporting Member
S
Join Date
Jan 2008
Location
Vancouver
Posts
229
Does any one have a phone number for Control Techniques technical support?
I have a Unidrive SP modular I'd like to tweak but need a couple of things clarified prior to mucking around inside the program.
 

Similar Topics

S
Ever so slightly off topic
I'm suffering from a bit of memory loss. About 5 years ago I did a service call on a roof flashing cnc press brake. Among other things that were...
Replies
5
Views
1,801
Soggy Canuck
S
J
Slightly off-topic-USB Oscilloscopes
I'm in the market for purchasing a USB-Oscilloscope. I am hoping to get some advice from anyone that has any experience with these and can...
Replies
4
Views
1,655
Ken Roach
Ken Roach
Russ
Slightly Off Topic: Frozen Regulator (stumped)
I'm sorry, I know this is off topic. But I figured that this was a good place to get some good advice. I have a new maxitrol regulator (210D...
Replies
5
Views
4,886
icky812
icky812
Joe Loescher
Slightly off topic
Does anyone know of a solid state device that will turn a 24 vdc signal to a one shot pulse of approximately 5ms? I am using this signal to reset...
Replies
7
Views
2,990
Joe Loescher
Joe Loescher
Ken Moore
Slightly off topic: parallel pulse from meter
This slightly off topic, but I counldn't think of a better place to ask, so here goes: I currently have a magnetic flow meter (Rosemount 8732C)...
Replies
5
Views
6,900
Bitmore
B
Back
Top Bottom