einnh
Lifetime Supporting Member
I am looking to power a 10hp 208VAC 3phase motor from a PowerFlex 70 on a 240VAC 1 phase input.
Assuming I buy an oversized drive (Rockwell is recommending 50% over). Are there any other things I should watch out for? Anyone have experience with this that could offer some tips?
Nearly all of our machines to date have been 480VAC in and 480VAC out 3 phase.
Assuming I buy an oversized drive (Rockwell is recommending 50% over). Are there any other things I should watch out for? Anyone have experience with this that could offer some tips?
Nearly all of our machines to date have been 480VAC in and 480VAC out 3 phase.