Module for comunication with Modbus TCP/Modbus RTU bridge

Oleksandr_Husyev

Member
O
Join Date
Mar 2015
Location
Mariupol, Ukraine
Posts
71
Hello!
Would you please advice me which module between 140 NOC 771 10, 140 NOC 780 00, 140 NOC 781 00 can I select to communicate with Modbus TCP/Modbus RTU bridge? I found out in the catalog that all these modules support Modbus TCP IO scanning. But which is the best one for my application?
Any your help I will appreciate a lot :)
 

Similar Topics

P
Siemens PLCSIM & Comunication module simulator
Hello everyone! I am using Siemens S7 PLCSIM to test my ladder program. Unfortunately the Communication module can't be tested because there is no...
Replies
5
Views
5,156
PLC_talk
P
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
58
Ken Moore
Ken Moore
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
82
yawin
Y
A
AMI0800 Analog Input Module's I/O LED is Lighting up red
Why AMIo800 Analog input module's I/O LED is Lighting up Red? Checked module connections, 4-20ma wires etc but this light is continuously Lighting...
Replies
1
Views
75
nicherbert
N
H
A/I module 1756-IF16 Allen Bradley
Hi all, installed on chassis A17 an A/I from Allen-Bradley , problem is what ever I do , all channels are sticked on value 39.9 and cannot change...
Replies
1
Views
132
dummy_bit
dummy_bit
Back
Top Bottom