Can't connect to PVP - VMware

rQx

Lifetime Supporting Member
R
Join Date
Oct 2010
Location
Trelleborg
Posts
1,051
Hi!

I have the following setup.

VWware - Windows 8 - **** ecatcher - PVP6

I have set up the VMware to NAT and I can succesfully ping my PVP6. But when I try to download a program through FTV Studio I can't. I open RSlinx and can't get connection there either.

I'm pretty novice on Rockwell so I could easily do something wrong here

/Tim
 
I got some more info on this case. I can use a vnc viewer in the vmware player to mirror the panelview aswell, indication that I have connection
 

Similar Topics

C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
86
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
91
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
331
TheColt46
T
J
Rockwell Techconnect service contract price increase?
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor? 30% seems...
Replies
5
Views
284
bill4807
B
A
Connect a single quadrature encoder to more than one input device
Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
271
Aure_PLCs
A
Back
Top Bottom