Advanced HMI question

joaco1993

Lifetime Supporting Member
Join Date
Sep 2014
Location
newyork
Posts
237
Hi, does anybody knows if advanced HMI scada has the capability of indirect adressing ??

I want to create just one popup for pumps, but depending the pump i choose, i will direct to one tag or to another..

thanks
 

Similar Topics

Hi Archie, I visited the web site http://www.advancedhmi.com/ and the last news item shown on the site was posted in mid-2013 I have a few...
Replies
5
Views
3,812
I’m new to plc programming and very new to HMIs. So this is what I have done so far: I bought a micrologix 1100, I used bootP to set the up...
Replies
17
Views
1,622
So I installed advanced hmi and grabbed an ethernet cable. I have the click C0-12DRE-1-D PLC. I installed the advanced hmi and added the...
Replies
13
Views
1,980
Do I use the ethernet port on the click plc to connect it to my computer. Will advancedhmi work properly? Am I able to start data logging into a...
Replies
1
Views
907
Having a hard time getting the data received when using BeginReadMultiple. Not the most familiar with the ClxDriver and EthernetIPforCLXCom()...
Replies
8
Views
2,280
Back
Top Bottom