xenoben Member X Join Date Apr 2016 Location Szeged Posts 6 Apr 13, 2016 #1 I have a request that I need to program a ventilator that must be start every morning in a particular time. I have a Xinje xc3 modul for this. What kind of solution can I use for this problem? Thanks for the answer
I have a request that I need to program a ventilator that must be start every morning in a particular time. I have a Xinje xc3 modul for this. What kind of solution can I use for this problem? Thanks for the answer
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Apr 13, 2016 #2 http://www.imenista.com/pdf/XCPLCV2.51.pdf Use the [TRD] function or Time Compare [TCMP] to read the real time clock Regards,
http://www.imenista.com/pdf/XCPLCV2.51.pdf Use the [TRD] function or Time Compare [TCMP] to read the real time clock Regards,
xenoben Member OP X Join Date Apr 2016 Location Szeged Posts 6 Apr 13, 2016 #3 ahhh okay, so according to this if i want to start the fan every morning at 8 my ladder should look like this? ---|X|------------[TRD][D3]---------- ?
ahhh okay, so according to this if i want to start the fan every morning at 8 my ladder should look like this? ---|X|------------[TRD][D3]---------- ?
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Apr 13, 2016 #4 I have sample code that I can paste when I get home in around 4 hours.
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Apr 13, 2016 #5 I retract my time estimate. I had a copy on my pendrive. See rung 1588 as an example.
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Apr 13, 2016 #6 easier to read, I hope photo share
xenoben Member OP X Join Date Apr 2016 Location Szeged Posts 6 Apr 13, 2016 #7 oh wow many thanks my friend
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Apr 13, 2016 #8 You're welcome. Thanks for the link to the manual, Garry. That's better than the half english half chinese one I was using years ago!
You're welcome. Thanks for the link to the manual, Garry. That's better than the half english half chinese one I was using years ago!