link para error 3105

I have an error light flashing on my Q06Udeh Mitsubishi CPU, I did an PLC diagnostic check and receive an Link para Error 3105 parameter No C202. I have checked my parameters and starting I/O and see no issue.

The rack just has a CC-Link network card and Ethernet card. I also have a GOT2000 Qbus connected.

Any help would be awesome

http://www.accs.cz/Files/FA/PLC/Q_Hardware_Manual_EN.pdf

From the manual this is the corrective action:
Correct and write the network parameters. If an error occurs after correction, it indicates a hardware fault. Contact your local Mitsubishi representative.

Hope this helps,