Quick question
- Thread starter chui84
- Start date
Like your .doc says, Start with the scope.
What problem is this project trying to solve? Draw the problem out. Etc.
Looks like at a high level - You need to control 2 pumps to prevent wet wells from overflowing. What triggers the pumps to turn on and off? What happens when a pump doesn't turn on?
What problem is this project trying to solve? Draw the problem out. Etc.
Looks like at a high level - You need to control 2 pumps to prevent wet wells from overflowing. What triggers the pumps to turn on and off? What happens when a pump doesn't turn on?
Last edited:
harryting
Lifetime Supporting Member
I'm impressed by the quality of the assignment.
Similar Topics
So the quick and short of the situation is that I designed an axle press that was sent to one of my company's other facilities. That facility just...
So I have a PID loop on an 1756-L61 running V17 software just for background.
Also the PID PV is a pressure transmitter and the CV is speed sent...
Has anyone come across a 3 turn potentiometer that is panal mounted with either a 22 or 30 mm hole? I have been looking but nothing so far.
They...
Hi, I am just learning CCW, finally got connected to a micro820. I'm wondering what the Version number means. The program that was already in the...
How do I measure if I am getting a signal out of the plc output? All of the outputs are giving me the same voltage, however I am certain that not...
