Omron CP1E output chanel.

Nauris

Member
Join Date
Jul 2015
Location
Riga
Posts
11
Dear Sirs/madam,

I downloaded programm from omron CP1E Plc and I have one question.


In the programm (and symbols) I see that function which is switching on/of the valve is conected ro the chanel 102.07, but in controller there has not this chanel (I have chanels: 0, 1, 100,101).

In real life the valve is conected on the 100.03 and all is working, but in the programm I cant find that somewhere in program 100.03 is used.

Please help me solve this :D

O_207.jpg O_207-2.jpg O_207-2-1.jpg
 
The may have turned bits on/off in another channel and moved the information into channel 100. This would then set all of the bits (100.00 to 100.15) including 100.03. Do a search on 100 to see if information is moved (MOV) as a channel.

Regards,
 
Cant

Somehow I cant find this output anyway.

answ1.jpg

answ2.jpg

Please maybe you can check this code-
https://*****/ftObNwRNxE
 
102.07

Please be so kind and explain me where I can find chanel 102 on CP1E?
I see in program used 102.07 but which output pin is it?

Capture.PNG CP1 E.jpg
 
It is not a 60 point unit so there is only channel 100 and channel 101 - channel 102 would be on an expansion block.
 
CP1L M30DT1-D with no expansion has 18 physical inputs 0.00-0.11/1.00-1.05 and 12 physical outputs 100.00-100.07/101.00-101.3.

All other CIO can be used as a boolean work bits in a program.
So 102.7 is a work bit NOT a physical output.

CP1L30.jpg
 

Similar Topics

Hello. I have a problem with omron sysmac cp1e controller delayed start. The controller has been working on the punch press since 2016. Recently...
Replies
1
Views
754
Hi, I need to communicate omron CP1E PLC with SCADA to get the status of the machine. There is no etherent port available but an empty expansion...
Replies
2
Views
1,591
Hello... I remove one CP1E from old useless machine and I would like to use it with something else....but it is locked/have no pass/....How can I...
Replies
0
Views
1,436
hi all i have used a real time clock to turn on a bit after 1 month. the plc was off for this whole month and when i turned on the plc after a...
Replies
2
Views
1,413
We had a CP1E go bad (power issue). Installed spare and could not get it to communicate to our motion drive via add on RS485 card. Tried...
Replies
5
Views
1,479
Back
Top Bottom