mm08822 Member M Join Date Apr 2016 Location NJ Posts 7 Apr 26, 2016 #1 Hello all, I would like to trigger a graphic display in FT View SE 8.1 from a ControlLogix PLC by setting a bit. I can't find how to do this in FT. Any suggestions? Thx
Hello all, I would like to trigger a graphic display in FT View SE 8.1 from a ControlLogix PLC by setting a bit. I can't find how to do this in FT. Any suggestions? Thx
ASF Lifetime Supporting Member A Join Date Jun 2012 Location Australia Posts 3,921 Apr 26, 2016 #2 Welcome to the forum! In ME (machine edition) - easy. In SE (site edition) - royal PITA. You'll have to use VBA. Check out this thread which is me trying to work out the exact same thing. I eventually got it working with the information on that thread.
Welcome to the forum! In ME (machine edition) - easy. In SE (site edition) - royal PITA. You'll have to use VBA. Check out this thread which is me trying to work out the exact same thing. I eventually got it working with the information on that thread.
mm08822 Member OP M Join Date Apr 2016 Location NJ Posts 7 Apr 27, 2016 #3 Thanks, ASF. I will use that vba code as a guide and put it into my navigation button display that is always open.
Thanks, ASF. I will use that vba code as a guide and put it into my navigation button display that is always open.