mahmoud_ics
Member
Hi, every body,
i need your help about a little problem concerning a blocked analog variable in the same value despite of modification requests from the HMI and from the online program too.
for example, the value blocked is 21, when i enter 25 and i confirm it comes back to 21.
i m using trusted toolset programming software with a T8110B Trusted TMR Processor from ICS Triplex.
thank youuuu
i need your help about a little problem concerning a blocked analog variable in the same value despite of modification requests from the HMI and from the online program too.
for example, the value blocked is 21, when i enter 25 and i confirm it comes back to 21.
i m using trusted toolset programming software with a T8110B Trusted TMR Processor from ICS Triplex.
thank youuuu