Red Lion HMI with Omron PLC Comm problem

HNPS Ryan

Member
H
Join Date
May 2016
Location
Edmonton
Posts
1
Hi,

First post, I am new to this forum. I tried searching with no luck.

I am using an Omron PLC - CJ2M CPU32,and I am trying to get it to communicate with a Red Lion, G07 HMI screen. In crimson 3 I have set up the driver to Omron Master via FINS. The problem is that I haven't really setup a FINS network before so I am unsure of where to set the network, node and unit numbers in cx-programmer.

Can someone point me in the right direction?
 

Similar Topics

J
Red Lion CR1000 HMI with Micro830
I am having issues getting a Red Lion HMI and Micro830 controller to communicate. I am using the cable here to connect the controller to the RS232...
Replies
0
Views
117
jbilby62
J
C
Red Lion HMI - G320 - Sending Null command
Hi I need to send a null command down a comms port. But in the crimson software when i used /x00 it coming back "Cannot use null character is...
Replies
2
Views
420
chelton
C
W
Red Lion HMI Displaying .csv File
Hi Everyone, I am hoping a Red Lion Expert can point me in the right direction. I am experimenting with data logging on a CR3000 10" screen...
Replies
4
Views
602
woolie161
W
D
Red Lion HMI, tag's modbus register address - can change during runtime?
I have a Red Lion G09 scanning 8 Invertek P2 VFDs via modbus RTU - I've setup necessary comms and tags and all works well. I have a 'Settings'...
Replies
3
Views
1,871
BryanG
B
Lamboom
Replacing the touch screen on a G3 Red Lion HMI
Has anyone ever replaced a touch screen on a legacy Red Lion G3 series HMI?
Replies
12
Views
1,454
Lamboom
Lamboom
Back
Top Bottom