PLC Pie Guy
Member
Good day all.
Quick question just to confirm my suspicion that I have a failed output card. Current output, 4-20ma, 24VDC supplied to card, output channels see 10.4 VDC and 0ma.
Problem?
I should mention this is the result of a fuse blowing that supplies the card with 24VDC, I think at this point from water penetration.
Thanks
Quick question just to confirm my suspicion that I have a failed output card. Current output, 4-20ma, 24VDC supplied to card, output channels see 10.4 VDC and 0ma.
Problem?
I should mention this is the result of a fuse blowing that supplies the card with 24VDC, I think at this point from water penetration.
Thanks