Press controller refurb

dwoodlock

Lifetime Supporting Member
dwoodlock
Join Date
Nov 2012
Location
Cincy/nKY
Posts
567
Looking for recommendations or interest:

I have a transfer press in our facility that needs the old Omron C200H replaced with something newer, and obviously functional.

I was hoping someone could recommend a company in the Southeastern US.
as we are located in Upstate South Carolina.

If you want more info so you can quote, send me a PM and I can get you a formal RFQ.

Thanks in advance.
-Dan
 

Similar Topics

B
Which is the best express method to choose and tune the PID controller?
I know only 2 express methods for choosing and tuning the PID controller: the Kopelovic's method and the Zigler-Nickols's method. Are theese two...
Replies
1
Views
5,719
Tom Jenkins
Tom Jenkins
D
Unable to connect FTV SE to SQL EXPRESS Server
Hi all, I'm having difficulties trying to connect FactoryTalk View SE Local Station (V13.00) to MS SQL Server Express. I state that they are...
Replies
2
Views
131
Cheeseface
C
Mas01
Siemens S7/TIA v18: Using a button press to Write to a DataLog...
Context: PLC= S7-1212C, HMI=KTP1200 Basic. Hi, The operator has reported that, from time-to-time, when he presses the "Generate Report" button...
Replies
5
Views
461
Mas01
Mas01
D
PLC for press brake
I have a old press brake that I want to retrofit a PLC to with a linear encoder on the Y axis and a stepper motor on X axis. Y Axis: I would...
Replies
11
Views
2,359
atc222
A
F
Cisco IE-2000-8TC-G-E Express Setup "404 - page not found"
When I log on to my Cisco switch via a browser, following the express setup instructions (after boot up is complete, hold exp. setup, exp light...
Replies
4
Views
1,952
TWS
T
Back
Top Bottom