Problem with connection

m.peric87

Member
M
Join Date
Feb 2013
Location
Serbia
Posts
39
I have a problem to connect these two devices:
1747 L532 SLC 5/03 processor RS485
PanelView Plus 600 (2711P-B6M20A8) RS232


I have interface converter 1761 NET AIC.
So far I succeed to make connection via DH485 UIC drivers in RSLinx.

But problem is with Factory Talk View Studio.
In RSLinx Enterprise I dont see processor and Panel, so I cant connect Panel with PLC.

Does somebody know what should I do?


Thanks in advance
 

Similar Topics

D
MVI56-MNET Problem with connection
Hello, I have an MVI56-MNET module, which is installed together with EN2TR, with a subnet of ~10, all instructions have been added to the project...
Replies
4
Views
422
desa
D
E
Weinview/Weintek EasyAccess connection problem
Hi, I bought a Weinview/Weintek MT8071ip HMI and an EasyAccess Activation Card. I have activated the card on the HMI (it says activated), but...
Replies
1
Views
900
Oladimgba
O
A
Connection problem of 1770 kfd with devicenet and laptop
Hi all, I really need some advice for establishing communication between 1770 KFD with DeviceNet and my laptop. 1. What cable should I use to...
Replies
12
Views
2,427
arpus4KM
A
A
EX260 Ethernet/IP slave connection problem
Hello there. I have bougth a SMC EX260 SEN-1 ethernet/ip slave and i want to control it from windows PC (with Modbus TCP may be?). Is it possible...
Replies
1
Views
988
the_msp
the_msp
T
Modbus Connection Problem - S7-1500
Having some issues initiating a connection to a S7-1500 PLC over Modbus. I have an OB created with a MB_SERVER block and a configured port (Port...
Replies
2
Views
1,586
Pierre
Pierre
Back
Top Bottom