PanelView Plus 1000 & OPC

WaddlingMonkey

Member
W
Join Date
Jun 2016
Location
London
Posts
1
I've just been told by AB/Rockwell support that Panelview plus 1000 (FT ME 8.1) won't support OPC using the Kepserver.

Is that right - I've since found in the manual suggests otherwise? Has anyone done this before?

Thanks,

WM
 

Similar Topics

J
FactoryTalk View Studio, Panelview Plus 6 1000, Edit alarm message
Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
124
Jako
J
P
AB Panelview Plus 1000
Hi everyone, I've been tasked with creating a basic HMI for commissioning purposes for two pumps on a AB Panelview Plus 1000, 2711PRDT10C. I have...
2
Replies
16
Views
2,855
arpus4KM
A
S
Pinout for PanelView 1000 plus power supply
im tring to find out if i have a bad power supply for my panelview 1000 plus. does anyone have the pinout for the 10 pin connector on the...
Replies
1
Views
1,852
5618
5618
W
PanelView Plus 1000 x/y chart
I need an X/Y plot to visually represent data o a roundness gage I am designing. ActiveX ME Chart Control UDT seems broke. Any advise one how to...
Replies
0
Views
657
wolfepak616
W
celichi
PanelView Plus 6 1000 - MER File
Hello Everyone, I hope we are all good today! I have a project from 2015, and the customer is locked out of the HMI. They do not know what the...
Replies
5
Views
1,955
celichi
celichi
Back
Top Bottom