1769-HSC Vs. Micro850 High Speed Counter

Jacob Brown

Member
J
Join Date
Aug 2015
Location
Missouri
Posts
10
We have some Pines Benders that we want to upgrade to a digital bend angle, one of them has a CompactLogix PLC with a 1769-HSC module, but I was hoping to go cheaper by using a Micro850 (either the DC models that have embedded HSC inputs or the AC models with a 2080-MOT-HSC). Is there a difference between their performance, or are they pretty similar? I will be attaching an encoder to the High Speed Counter module. Thanks!
 

Similar Topics

ceilingwalker
Help Setting up 1769-HSC with prox switches
Hello all. I am having trouble setting up my HSC to count pulses from a prox switch. I have it wired to the prox and I see the .InputStateA0...
Replies
3
Views
1,369
ceilingwalker
ceilingwalker
ronny_resistor
1769 hsc rate counter
Here is my hail Mary pass I have a wheel that produces 33 pulses per revolution. The RPM of that wheel will be anywhere from 25.21 to 62.7 Pulses...
Replies
14
Views
4,697
ronny_resistor
ronny_resistor
glenncovington
1769 HSC/B Underflow error
Hello all. I have an issue that keeps plaguing me. The system has a 1769-L24ER processor and a 1769 HSC card. I am using CH.0 for tracking...
Replies
0
Views
1,464
glenncovington
glenncovington
R
1769 HSC Rate in RPM
Hello, Im trying to use a 1769 HSC card to get the RPM of a single channel encoder at 60ppr. Ive read the other threads of people have similar...
Replies
0
Views
1,694
Riiska
R
B
1769-HSC Configuration Error
Flashing Red OK Status indicator : Rockwell Automation Publication 1769-UM006E-EN-P - July 2013 Table 23 - Configuration Error Codes pg 117...
Replies
3
Views
2,174
plvlce
P
Back
Top Bottom