rankhornjp
Member
Controllogix L62
RSLogix 5000 v:20.11
I have configured several PF525 in my project, but the latest one won't connect and I can't figure out why.
When I try to look for it in RSLinx it shows up as an unrecognized device. I have the 4 EDS files installed and I have 8 other 525s that I have configured and they work fine.
EDIT:
Parameter Changes:
Start Source 1 = Ethernet
Reference Source 1 = Ethernet
C128 = Parameters
Set Ip, Subnet in parameters in 129-136
Left gateway all "0"
Not sure what to check.
Thanks
RSLogix 5000 v:20.11
I have configured several PF525 in my project, but the latest one won't connect and I can't figure out why.
When I try to look for it in RSLinx it shows up as an unrecognized device. I have the 4 EDS files installed and I have 8 other 525s that I have configured and they work fine.
EDIT:
After about 30 secs the device gets a red "X" on it.
Parameter Changes:
Start Source 1 = Ethernet
Reference Source 1 = Ethernet
C128 = Parameters
Set Ip, Subnet in parameters in 129-136
Left gateway all "0"
Not sure what to check.
Thanks
Last edited: