Siemens s7 200 communication error

Umair

Member
U
Join Date
Jun 2016
Location
Saudia
Posts
3
Sir,
When i connect my new sensor with plc the hmi show communication error before its working with the old sensor now we have to replace the sensor but it showing communication error when we connect with the plc.
 

Similar Topics

R
Siemens S7-1200 profinet communication with codesys plc
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
2 3
Replies
43
Views
2,824
raghu_k
R
H
Siemens S7-1200 communication with Cognex 2800
Which signals do I have to use to get data from camera. For example camera detects a defect and sends signal to controller. Power cable: CCB-PWRIO-05
Replies
1
Views
206
Puddle
P
P
Communication Siemens S7 1200 <-> Robot over EtherNet/IP
Hello, I'm trying to figure out, if it's possible to communicate with 3rd party device (robot) over EtherNet/IP. We're trying to prove, that...
Replies
7
Views
4,902
mk42
M
U
Developing Communication between Energy Meter(Indigo+ Schlumberger) & SIEMENS S7-1200
Developing Communication between Energy Meter(Indigo+ Schlumberger) & SIEMENS S7-1200 Hi Members, I am Currently facing a challenge regarding...
Replies
0
Views
1,486
Usama_maqsod
U
C
Siemens S7-200 Smart Communication / Ethernet
Hi I have an S7-200 smart PLC Im trying to connect through the Ethernet port but to no avail, everytime I go to set it up in the PG/PC config...
Replies
4
Views
5,771
cjthemack
C
Back
Top Bottom