what does this STL code means ?
- Thread starter Kitss
- Start date
L D[AR2P#0.0]
Lifetime Supporting Member
PLC ? might be siemens with typos
in which case it means assign the current value of the RLO (result of logic operation) to Q0.1
Code:
= Q0.1in which case it means assign the current value of the RLO (result of logic operation) to Q0.1
what is the 'I' looking symbol in the middle. what's that ?
L D[AR2P#0.0]
Lifetime Supporting Member
Is this siemens?
Post a screen shot.
Post a screen shot.
Similar Topics
so the code I am trying to do loads two different values and then I try and tell if the value subtracted from the other value is less than 15 and...
I am trying to connect with a Schneider plc which has a firmware version only available in Somachine v4.2. In Machine expert After taking upload...
They are installed in a control panel that was made in France and are intended for the termination of analog inputs. Each of the red capped...
So, I'm really just trying to get some experience by practicing with arrays. I'm using studio 5000 v33.
I have one rung with an XIC bit that's...