1734 Allen Bradley Point I/O

Burch

Member
B
Join Date
Jun 2014
Location
Michigan
Posts
54
Is there a way to get to the information "behind" the Network and Module status LEDs on AB 1734 Point I/O modules?

I'd like to mimic this information on our HMI.

Thanks,

Burch
 
Yes you can use the GSV instruction to pull detail from the 1734-AENT(R) adapter. Read the manual it should be in there.
 

Similar Topics

D
Allen Bradley 1734-AENT issue
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
2
Replies
19
Views
791
jstolaruk
J
H
Allen-Bradley 1734-AENTR Ethernet Redundancy
We have a lot of POINT-IO modules in various places all over our machines. Occasionally one of the daisy chained cables between our 1734-AENTR...
Replies
4
Views
1,737
JeremyM
JeremyM
C
Allen-Bradley 1734-AENTR B energizing outputs when disconnected
Good Morning! I am new here and have limited experience in working with PLCS, and desperation has brought me here with a problem, hoping some of...
Replies
9
Views
2,904
Barqs1968
B
A
Allen Bradley 1769-L18ER-BB1B local 1734 point IO modules arrangements
Hello, I want to connect 1769 L18ER PLC with 8 number of 1734 pont IOs. 24V Dc 8 Channel Sink Input Module: 3 nos 24V Dc8 Channel Source Output...
Replies
11
Views
7,756
Geospark
Geospark
N
Allen Bradley 1734 Remote IO
Is there any reason to match revision exactly to what was installed?? Lets say I have a OB8 card and its 3.022 revision. Is there any reason not...
Replies
7
Views
2,159
nmurray
N
Back
Top Bottom