danfuss microdrive

seee

Member

S

Join Date

Dec 2010

Location

singapor

Posts

112

• Aug 13, 2016

• #1

hello.
please help me on how to reset parameters of danfuss micro drive fc051
to factory state.
best regards.

 

rgua

Lifetime Supporting Member

R

Join Date

Mar 2003

Posts

144

• Aug 13, 2016

• #2

write 2 into parameter 14-22
then switch off wait until the display turns off, switch the converter on. After that, converter will display message „AL80”. Confirm this message pressing [Off/Reset] once.

https://www.youtube.com/watch?v=xQxHZttjN00

 

Last edited: Aug 13, 2016

seee

Member

OP

S

Join Date

Dec 2010

Location

singapor

Posts

112

• Aug 13, 2016

• #3

there isn't parameter 14-22 in the main menu of the drive.

 

rgua

Lifetime Supporting Member

R

Join Date

Mar 2003

Posts

144

• Aug 14, 2016

• #4

may be a special version:

try:
1 Inverter OFF
2 Press and maintain pressed [STATUS], [MAIN MENU] and [OK] buttons
3 turn ON the inverter, wait
4 wait the relay on, "click" then release buttons
5 After that, converter will display message „AL80”. Confirm this message pressing [Off/Reset] once

 

seee

Member

OP

S

Join Date

Dec 2010

Location

singapor

Posts

112

• Aug 14, 2016

• #5

you have mentioned that press the keys main menu, status but there isn't seperate "status" or "main menu" button!!!

 

Last edited: Aug 14, 2016

rgua

Lifetime Supporting Member

R

Join Date

Mar 2003

Posts

144

• Aug 15, 2016

• #6

Press [MENU] button until the Main Menu, not Quick Menu
then as post #2