Communication b/w S7 200 plc and KTP400 basic PN panel

SMark

Member
Join Date
Aug 2016
Location
Montreal
Posts
5
Hi everyone,
i am working on a project S7 200 plc communication with KTP400 basic PN Panel.i am using a S7 200 plc cpu 224Xp and HMI KTP400 basic PN panel and Netlink pro compact Ethernet gateway for PPI/MPI/Profibus. i do not have a ethernet cp 243-1 but i have netlink pro compact ethernet gateway. i want to use RFC 1006 ISO on top of TCP protocol.In s7 300 plc i use this protocol RFC 1006 successfully but i do not know how use of RFC 1006 protocol use in Microwin for s7 200. i hope all expert will help me.thanks
 
Hello SMark,
Basically netlink is use for ethernet gateway for mpi/ppi/profibus for S5 and S7 plc.it can use as cp 343-1 and cp 243-1.when you connect s7 200 plc and hmi with ethernet protocol.you must have ethernet cp 243-1 or ethernet gateway netlink or other product.so set the parameter of netlink as attach of image.it is possible only when you connect hmi and plc not pc.thanks

netlink.jpg
 

Similar Topics

Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Replies
39
Views
2,053
can i send and recieve data using my yokogawa UT35A controller with my siemens s7 1200 plc using profinet communication without using gsd file
Replies
1
Views
355
Dear Experts, Good day I have to make ethernet communication between S7-1200 ( 1215c) and Beckhoff PLC CX5010. My question here any expert can...
Replies
6
Views
4,159
Dear Experts, One of my client using S7-300 Plc In that Cp343 Module also using for scada and hmi connection ...
Replies
10
Views
6,575
I’m currently working on a project that requires communication to be established from SIEMENS S7-1200 PLC to the Distributed Control System (DCS)...
Replies
0
Views
7,612
Back
Top Bottom