Depends On Your PLC, I Know Allen Bradley Pretty Much, Most Parts INTERACT 6.0
Will Work, ie; Allen Bradley SLC5's/MicroLogix-1200
INTERACT 7.0 For a Micrologix-1400 [Ethernet]
Interact 7.0 Zip Download
http://divapps.parker.com/divapps/emn/download/Interact/7.0/Interact7.zip
If you Get Interact 6.0, Need No Key, Will Function 100% In "Preview" Mode For 1 Hour
Boot You Out, Then Start Again, Unlimted
Interact 6.0 Comes On The MachineShop CD v1.04 Also v1.06
Just Finished Up For a Co-Worker a P2, w/ML1400 RS232-Comm There Great HMI's, No BTR/BTW, No MSG R/W For Data Transfer.
Latest Venture Here Is a Micrologix-1400 Ethernet DHCP Network On a P4, Must Use
Interact 7.0 For Ethernet Support w/Micrologix PLC's, Almost There With It I Think,
DHCP Ethernet Network Working w/P4, But Data Transfer, Read & Write Not Functioning
Correctly Yet. Hope This Helps.
Have Documentation On Cables (Pinouts-9DB Com Ports) For CTC-HMI's Mostly
Using w/Allen Bradley PLC Processors.
