IDEC FL1F series
- Thread starter MartyK
- Start date
John Morris
Lifetime Supporting Member
Idec customer support is a free service, no contract required
Call 1-800-262-4332, ask for Amram Alam. He knows everything about Idec, and if he doesn't he'll find out.
If he's not in or doesn't answer e-mail him at [email protected]. He will answer.
You probably have this but I thought I'd add it just in case ( users manual )
http://us.idec.com/Common/Download.aspx?d=410833
Call 1-800-262-4332, ask for Amram Alam. He knows everything about Idec, and if he doesn't he'll find out.
If he's not in or doesn't answer e-mail him at [email protected]. He will answer.
You probably have this but I thought I'd add it just in case ( users manual )
http://us.idec.com/Common/Download.aspx?d=410833
Similar Topics
Anyone have any knowledge if this SmartRelay is able to activate a output relay upon the loss of Internet. Currently to monitor this we are using...
I'm using IDEC FL1F Smart Relay.
I'm having issues with a keeping a gate open , I have a visitor lane and a resident lane that uses the same...
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
I'm trying to establish communication between an HMI DELTA (DOP-B07E515) and a PLC IDEC (FC6A-D16R1CEE) via the RS-232C/485 module (FC6A-SIF-52)...
Has anyone interfaced a PLC with a Control Techniques drive Nidec 750 using Modbus TCP? I am attempting to do so using an Automation Direct...