Red Lion HMI Keypad

Alex999

Member
A
Join Date
Sep 2016
Location
New Mexico
Posts
2
I'm needing to use a keypad in Red Lion HMI to password protect a page. Are there any built in keypads and how do I call them up?
 
Have you looked in the security section of Crimson 3.0 yet first off? Otherwise if you just create a data entry, the keypad is there when you go to enter data.
 
OK. I was able to use the Security configuration to password protect the page. Thanks for pointing me in the right direction.
 

Similar Topics

J
Red Lion CR1000 HMI with Micro830
I am having issues getting a Red Lion HMI and Micro830 controller to communicate. I am using the cable here to connect the controller to the RS232...
Replies
0
Views
117
jbilby62
J
C
Red Lion HMI - G320 - Sending Null command
Hi I need to send a null command down a comms port. But in the crimson software when i used /x00 it coming back "Cannot use null character is...
Replies
2
Views
420
chelton
C
W
Red Lion HMI Displaying .csv File
Hi Everyone, I am hoping a Red Lion Expert can point me in the right direction. I am experimenting with data logging on a CR3000 10" screen...
Replies
4
Views
602
woolie161
W
D
Red Lion HMI, tag's modbus register address - can change during runtime?
I have a Red Lion G09 scanning 8 Invertek P2 VFDs via modbus RTU - I've setup necessary comms and tags and all works well. I have a 'Settings'...
Replies
3
Views
1,872
BryanG
B
Lamboom
Replacing the touch screen on a G3 Red Lion HMI
Has anyone ever replaced a touch screen on a legacy Red Lion G3 series HMI?
Replies
12
Views
1,454
Lamboom
Lamboom
Back
Top Bottom