communication between slc 5/03 and Panelview plus 6 600

mroyce09

Member
M
Join Date
Aug 2016
Location
NH
Posts
13
Hello. I am in the process of designing a new project and I was able to successfully go online with the SLC 5/03 using a 1746-UIC cable through the DH485 port. I am wondering how to communicate the PLC to a panelview plus 6 600 HMI. I can see the PLC under network and devices in FactoryTalk ME Studio but I cannot see it in the RSLinx Enterprise/Communication setup.
 
Last edited:

Similar Topics

C
Communication between two separate SLC 5/05 PLCs ?
Hi, I have a machine with AB SLC 5/05 PLC and it already has its “Ethernet” port utilized for plant network. Now I'm designing one more panel...
Replies
4
Views
2,798
controlsatsaurabh
C
M
Communication between PV1000 and SLC-5/03
In my case I was having panelview900 connected to SLC 5/03 through DH485 using AIC+ Advanced Interface Converter (1761-NET-AIC), an Isolated Link...
Replies
1
Views
1,818
frcruz44
F
P
Communication between SLC 500 and SLC 500 DH+
I have 2 SLC500/04 The master has it´s own I/O The slave has it´s owns I/O if master has an Input on, i want the slave turn on an Output. how...
Replies
7
Views
4,890
pablorm
P
D
Spotty Communication between an AB SLC 5/05 & a Red Lion G315 HMI
Several months back we installed a Red Lion G315 HMI to communicate with a AB SLC 5/03 attached to the ethernet network via an AB ENI module...
Replies
5
Views
4,474
JeffKiper
JeffKiper
D
Communication between an AB SLC 5/05 & a Red Lion G315 HMI
We recently received a Red Lion G315 to be used to interface between an AB SLC 5/05 and several Micrologix 1400's via ethernet. This is my first...
Replies
5
Views
9,987
JeremyH
JeremyH
Back
Top Bottom