How to read the servo pulse in mitsubishi fx 1n plc.

vasanth mano

Member
V
Join Date
Aug 2016
Location
*******
Posts
2
I tried to read the actual pulse in D8140. Its shows the current pulse value. but want to compare that pulse for to start motor. for example:i need pulse 10000
=start motor Output, pulse 16000 =start motor,pulse 21000 =start motor.
in my fx1n plc no zone compare option, i tried with (high speed counter set) its not working. any idea please tell me.
 

Similar Topics

C
Using Servo Motor Encoder for Read Out
I have an AB MPL-320H-H servo motor being driven by an AB Ultra 3000 drive. The motor is directly coupled to a ball screw that moves a linear...
Replies
3
Views
1,834
widelto
widelto
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
130
Steve Bailey
Steve Bailey
A
Logix 5000 FAL Read Every Other Member
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Replies
5
Views
125
AMarks95
A
C
ControlLogix read force status in plc program
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
235
crawler009
C
L
Read real data from hmi to plc
Hi Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer). In this I want to read a data from hmi to plc. The data was like...
Replies
0
Views
94
Lee sung
L
Back
Top Bottom