The micrologix 1100 - l16dwd supports 12 vdc. I was looking at adding a 1762-IQ16 to the 1100 but I am concerned that the module needs 24 vdc. The manual says voltage category 24 VDC but lists the Operating voltage range as 10-30 vdc. So which is it? has anyone used the 1762-IQ16 with a L16DWD in a 12 vdc system?
1762-IQ16 in a 12 volt system?
- Thread starter diat150
- Start date
Gil47
Member
My view on it is
We guaratee to switch if you have atleast 10 vdc and
We can not guarantee, as a burn could occur if you exceed 30 vdc
We guaratee to switch if you have atleast 10 vdc and
We can not guarantee, as a burn could occur if you exceed 30 vdc
Last edited:
Similar Topics
Hi all,
I have a doubt, it might seems silly though. I would really appreciate it if you could describe how to do this connection.
There is a...
Does anyone know what type of thermister for the CJC on a 1762-IT4 thermocouple card? I have searched everywhere and can not find. I can not see...
Hi every master,Recently i met a fault about 1762-L40BWA
1,When i get the PLC, The Fault light is lighting, I am not remember the fault message,I...
Hello everybody and master,I met a problem about ML1200.It is described as below:
1,When i got this PLC,The FAULT light is lighting, My computer...
I have 1769-IF4 module and 1766 micrologix 1400 series B controller, when connecting Analogue input in module it's showing maximum values of...