Does anyone know of a good HMI that works well with Opto 22? I've been trying Red Lion G306M000 and have been coming up with difficulties in transferring tags to it. Any suggestions?
Thanks!
Thanks!
Needing an HMI
- Thread starter damiens
- Start date
Archie
Member
What protocol and interface are you using? OptoMux?
Similar Topics
Hi I would like to know if you can suggest a solution to a problem.
I have a piece of machinery that is primarily pneumatic in its operation and...
So I have the following assignment for a class I am taking.
"Program overview:
The size of the load to be wash is selected first. The start...
So we just wired up a small automotive shop. They bought a second-hand lift but only have a single phase service.
The motor is 3 phase, and the...
Any chance that one of you fine gentlemen might be able to help me with a small excel/vb issue. I have vb code that time stamps and records a...
I am working on a conversion from a SquareD PLC to a SLC series PLC. I have run across one issue that I can not seem to overcome. The older system...
