AD terminator I/O

[eastkodakguy]

Hey all,
After everyone saying great things about automation directs plc's, I am thinking about taking the plunge. I am highly interested in their remote I/O "terminator"ethernet or devicenet. I have read alot of good things about it and was wondering if any of you have utilized it before. I am primarily interested in using it with a AB based controller. I know it supports the SLC, But does it support the Controllogix?
any info appreciated
Dallas Smith

www.PowerhouseAutomation.com

[ArikBY]

Hi

I also wonderind if someone try to use the Terminator with DL06 with Ethernet or Modebus.
It look good to me idea to expand the DL06 for long distance I/O.
Any opinion would be appreciate.
BTW Dallas I spend some time in Fayetteville, Arkansas when I installed my first line over there,and I have some good memories,especially from the bar in the old power statoin.


All the best

[ndzied1]

I have used it with a custom industrial computer interface (which was designed by someone else). It worked just as advertised. However, everything was in the same cabinet.

[elevmike]

I've considered the Terminator, but not after working out the total cost.... Consider other alternitatives such as Modbus or DirectNet or Slice I/O etc. Depending on the project you might find Terminator more expensive.

[LittleOne]

If I had a project with an AD processor I would use the terminator I/O because it supports AD's ethernet solution. If I would need remote I/O with an other processor I would probably look at Wago. They are cheap and don't need a socket.