1757-srm
- Thread starter mazizmed
- Start date
Get the fault logs from the module. The procedure is described in this technote:
TN55721 - Redundancy Modules : Extracting Log Files (Access Level: Everyone)
Errors are described in the installation manual, page 27 to 30.
Collect all the information you can and post it.
TN55721 - Redundancy Modules : Extracting Log Files (Access Level: Everyone)
Errors are described in the installation manual, page 27 to 30.
Collect all the information you can and post it.
Similar Topics
Good day.
Bit of an unusual problem. I have a simple rack composed of a 1756-L63, a 1757-SRM and a 1756-ENBT (Yes, all old and pretty much not...
Dear experts,
In order to eliminate a fault in my system I want to change the firmware of following modules in 1756 Controllogix Standard...
We have an L55/A redundant PLC at firmware revision 13.70, the 1757-SRM is at firmware revision 3.37. Last week we got two times fault alarm "E2h1...
dear all,
I have problem with RSlogix5000 Redundancy Module, Redundancy Module of Primary Controller is Showing Message FRMW ERR and the Status...
We have a problem with a 1757-SRM module used in one of our projects. The OK LED on the SRM is solid red and the power up self test gets stuck on...