ctg_00
Member
IC695CPE305-ADAN Does anyone know what the ADAN means in the part/model number?
Thanks,
ctg
Thanks,
ctg
GE IC695CPE305-ADAN Question
- Thread starter ctg_00
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Everything after the dash represents the firmware and revision levels.
You can get Datasheets that detail the different versions here.
Looks like you should update your CPU.
Looks like you should update your CPU.
Similar Topics
Hi
Does anyone know if the IC695CPE305 plc supports writing to holding registers (%R in GE world) using the modbus tcp protocol.
I am reading...
A while back I Converted a GE PCM module over to Modbus TCP. Due to the Discontinue of the IC693CMM321 I am redoing this project again. I am Using...
Is there a way to reset the count on the RS Logix BackUp??
XXXXX PROGRAM IN PROGRESS_BAK445.RSS
XXXXX PROGRAM IN PROGRESS_BAK446.RSS
XXXXX...
I have a few questions about Studio5000. 1. Why is my RA folder so big? its well over 100 GB. 2. How do you delete versions or extra files...
Currently we have a fat( I think that is what it is called) Intouch application. An application resolution of 3840x1080, and inside that 2x...