how to connect the relay to plc output side...help us

maheshboobalan

Member
M
Join Date
Nov 2016
Location
india
Posts
15
Thank for your kind reply mickey...

we are using MITSUBISHI FX5U-32MT/ES TYPE PLC..

we are in need to control the Permanent magnet dc motor through DC contactor via interposing relay..

so we need to connect the relay to plc output port and then
the relay output is going to control the motor contactor...
could you help me in this occasion...
 

Similar Topics

N
How to connect a relay to a relay output PLC
Hello, my problem arised when connecting this 12v 2 relay module to the relay output of a Mitsubishi Fx3g PLC, i have gone through the manual...
Replies
12
Views
9,270
rootboy
rootboy
S
How to connect water level sensor to relay?
I have a sensor which works by passing current through water. I mean it is simply naked wire in the water tank. I use 24VCD. Ground wire is at the...
Replies
8
Views
3,915
Firejo
Firejo
D
What happens if i connect a relay 'inverted'
Hi, I have a relay and i connected by accident a relay with the wires inverted to the PLC (DELTA). By this i mean the the wire from the PLC...
Replies
13
Views
6,654
delta_soft
D
C
iRConnect Fanuc Robotics, Anyone used this? Does it only support OpenRelay SMTP?
I'm looking at iRConnect for a customer of ours and testing it to see if its a worthwhile solution, but it appears to me that it requires an...
Replies
2
Views
3,202
cschlue
C
T
Where to get inexpensive: terminal relay for direct connect on DIN Rail
Hello Where can I get inexpensive Relays that directly mount on a DIN rail like...
Replies
9
Views
5,195
Lancie1
Lancie1
Back
Top Bottom