[email protected]
Member
Hello i want to communicate with servo lxm32 and the plc m221 and i dont know the correct control word to enable the drive.
Lxm32
- Thread starter [email protected]
- Start date
How are you going to communicate to the drive? Modbus TCP?
http://www.schneider-electric.com/ie/en/download/document/0198441113843-EN?_downloadcenter_WAR_downloadcenterRFportlet_documentId=9838053&_downloadcenter_WAR_downloadcenterRFportlet_documentDetailsBackURL=%2Fie_en%2Fschneider%2Fdownloads%2Fresults%2F0%2F0%3Faui_3_4_0_1_170%3DLXM32M%2BModbus-TCP%2Bmodule%26keywordForm%3DLXM32M%2BModbus-TCP%2Bmodule
The above is the manual for the Modbus TCP on the drive.
Regards,
http://www.schneider-electric.com/ie/en/download/document/0198441113843-EN?_downloadcenter_WAR_downloadcenterRFportlet_documentId=9838053&_downloadcenter_WAR_downloadcenterRFportlet_documentDetailsBackURL=%2Fie_en%2Fschneider%2Fdownloads%2Fresults%2F0%2F0%3Faui_3_4_0_1_170%3DLXM32M%2BModbus-TCP%2Bmodule%26keywordForm%3DLXM32M%2BModbus-TCP%2Bmodule
The above is the manual for the Modbus TCP on the drive.
Regards,
Similar Topics
Hello to everyone i want to work with lxm32(servo) and m221(plc) communicate with pto and i have problemm with (home block) when i do homing the...
Hello to everyone i have made i programm with plc( M221 and servo LXM32M) the communication is with PTO.I want to ask if i can take the variables...
Hello I want to ask a question what we mean connection with PTO(LXM32 SERVO MOTOR).I dont know what is the PTO.
Hello to everyone i have the servo drive LXM32M and i want to connect with the plc Modicon M221 with Modbus Rtu.